Viklight Accessories CANbeam Canbus-styrning Toyota

Beskrivning

CANbeam – The new digital auxiliary light wiring harness for automatic control of auxiliary lights

CANbeam is a Swedish-made digital auxiliary light wiring harness that offers a very high degree of integration with the vehicle’s high beam automation. It is designed to work with modern vehicle CAN bus-controlled adaptive LED high beams, bi-xenon, and similar systems.

In most cases, CANbeam enables the auxiliary lights to automatically follow the vehicle’s high beam function – meaning the auxiliary lights turn on and off simultaneously with the vehicle’s original high beams, completely without manual control.

CANbeam meets the automotive industry’s high quality standards for aftermarket electronics, and the components hold the same high standard as the vehicle’s original equipment.

Please note that functionality with automatic high beam control may vary depending on vehicle model and system version.

Toyota CHR 2025-
LED –
CAN-HIGH: PINK
CAN-LOW: WHITE
Item No: CANbeam_08
Connection is made under the kick panel inside the cabin.

Toyota Corolla 2025-
LED –
CAN-HIGH: PINK
CAN-LOW: WHITE
Item No: CANbeam_08
Connection is made under the kick panel inside the cabin.

Toyota Hilux 2025-
LED –
CAN-HIGH: BLACK (PIN24)
CAN-LOW: WHITE (PIN23)
Item No: CANbeam_08
The connection is made at the second connector piece at the bottom near the left front headlight.

Toyota RAV4 2024-
LED –
CAN-HIGH: PINK
CAN-LOW: WHITE
Item No: CANbeam_08
Connection is made at the left front headlights.

Toyota Yaris 2025-
LED –
CAN-HIGH: BLUE
CAN-LOW: WHITE
Item No: CANbeam_08
Connection is made at the left front headlights.

Missing your car model? – Please update us on this so we can ensure it gets added to the list.

Installation:
The installation of CANbeam is easily done in the engine compartment or in the wheel well on certain vehicles, which means that no installation needs to be done inside the cabin or through the firewall. To connect the system, the correct CAN cables are identified, and CANbeam’s connection cables are soldered together with these.

Installation instructions:
Can High: White
Can Low: Yellow

As an alternative, a traditional toggle switch can be used and connected to the brown wire. This should then go to 12v+

Maximum allowable load is 13A (156W at 12v). At higher loads, a separate reinforcement wiring harness must be installed; otherwise, CANbeam will be damaged.

5 years warranty.

Delivery info: When ordering more than the current stock balance or if stock status is ”special order”, this product has a normal delivery time of approximately 10-14 working days