Viklight Accessories CANbeam Canbus-styrning för Subaru och Isuzu

Beskrivning

CANbeam – The new digital extra light wiring harness for automatic control of auxiliary lights

CANbeam is a Swedish-made digital wiring harness for auxiliary lights that offers a very high degree of integration with the car’s high beam automation. It is designed to work with modern vehicles’ CAN bus-controlled adaptive LED high beams, bi-xenon, and similar systems.

In most cases, CANbeam allows the auxiliary lights to automatically follow the car’s high beam function – meaning that the auxiliary lights are turned on and off simultaneously with the car’s original high beams, completely without manual control.

CANbeam meets the high quality standards of the automotive industry for aftermarket electronics, and the components maintain the same high standard as the car’s original equipment.

Please note that functionality with automatic high beam control may vary depending on the vehicle model and system version.

Isuzu D-max 2022-
LED –
CAN-HIGH RED (Yellow on some equipment levels)
CAN-LOW: GREEN (Blue on some equipment levels)
Item No: CANbeam_01
Connection is made at the battery control connection.

Subaru Crosstrek 2024-
LED –
CAN-HIGH: BEIGE
CAN-LOW: BLUE
Item No: CANbeam_01
Connection is made at the control module in the engine compartment.

Subaru Solterra 2024-
LED –
CAN-HIGH: PURPLE (PIN24)
CAN-LOW: WHITE (PIN23)
Item No: CANbeam_01
Connection is made at the control module in the engine compartment.

Subaru Forester 2024-
LED –
CAN-HIGH: BEIGE
CAN-LOW: BLUE
Item No: CANbeam_01
Connection is made at the control module in the engine compartment.

Missing your vehicle model? – Please update us about this and we will ensure it is included in the list.

Installation The installation of CANbeam is easy in the engine compartment or in the wheelhouse on certain vehicles, meaning that no installation needs to be done inside the cabin or through the fire wall. To connect the system, the correct CAN cables are identified and CANbeam’s connection cables are soldered to these.

Installation instructions:
Can High: White
Can Low: Yellow

Alternatively, a traditional switch can be used and connected to the brown wire. This should then go to 12v+

Max allowable load is 13A (156W at 12v). If the load exceeds this, a separate reinforcement wiring harness must be installed, otherwise CANbeam will be damaged.

5-year warranty.