Viklight Accessories CANbeam Canbus-styrning Mercedes

Beskrivning

CANbeam – The new digital auxiliary light harness for automatic control of auxiliary lights

CANbeam is a Swedish-made digital auxiliary light harness that offers a very high degree of integration with the vehicle’s high beam automation. It is designed to work with modern vehicles’ CAN bus-controlled adaptive LED high beams, bi-xenon, and similar systems.

In most cases, CANbeam allows the auxiliary lights to automatically follow the vehicle’s high beam function – meaning that the auxiliary lights are turned on and off simultaneously with the vehicle’s original high beams, completely without manual control.

CANbeam meets the automotive industry’s high quality standards for aftermarket electronics, and the components maintain the same high standard as the vehicle’s original equipment.

Please note that functionality with automatic high beam control may vary depending on the vehicle model and system version.

Mercedes Sprinter 2024-
LED –
CAN-HIGH: GREEN/WHITE (PIN2)
CAN-LOW: GREEN (PIN1)
Part No: CANbeam_07
Connection is made at one of the front lights.

Mercedes E-Sprinter 2024-
LED –
CAN-HIGH: GREEN/WHITE (PIN2)
CAN-LOW: GREEN (PIN1)
Part No: CANbeam_07
Connection is made at one of the front lights.

Mercedes Vito 2024-
Analog – LED
Signal: WHITE/RED
Part No: CANbeam_07
The connection is made at the left front light.

Mercedes Vito 2024-
LED –
CAN-HIGH: PINK/WHITE (PIN2)
CAN-LOW: PINK (PIN1)
Part No: CANbeam_07
Connection is made at one of the front lights.

Mercedes E-Citan 2024-
LED –
CAN-HIGH: YELLOW/WHITE (PIN2)
CAN-LOW: YELLOW (PIN1)
Part No: CANbeam_07
Connection is made at one of the front lights.

Missing your vehicle model? – Please update us on this so we can ensure it is included in the list.

Installation:
The installation of CANbeam is simple in the engine compartment or in the wheel arch of certain vehicles, which means no installation needs to be done inside the cabin or through the fire wall. To connect the system, the correct CAN cables are identified, and CANbeam’s connection cables are soldered to these.

Installation instructions:
Can High: White
Can Low: Yellow

As an alternative, a traditional switch can be used and connected to the brown cable. This should then go to 12v+

The maximum allowable load is 13A (156W at 12v). For higher loads, a separate reinforcement harness must be installed; otherwise, CANbeam may be damaged.

5-year warranty.

Delivery info: When ordering more than the current stock balance or if stock status is “backorder,” this product has a normal delivery time of approximately 10-14 working days.