Viklight Accessories CANbeam Canbus-styrning Dodge

Beskrivning

CANbeam – The new digital auxiliary light wiring for automatic control of extra lights

CANbeam is a Swedish-manufactured digital auxiliary light wiring that offers a very high degree of integration with the vehicle’s high beam automation. It is designed to work with modern vehicles’ CAN bus-controlled adaptive LED high beams, bi-xenon, and similar systems.

In most cases, CANbeam makes it possible for the auxiliary lights to automatically follow the car’s high beam function – meaning that the auxiliary lights turn on and off simultaneously with the car’s original high beams, completely without manual control.

CANbeam meets the automotive industry’s high quality requirements for aftermarket electronics, and the components maintain the same high standards as the vehicle’s original equipment.

Please note that functionality with automatic high beam control may vary depending on the car model and system version.

Dodge RAM RHO 2025-
LED –
CAN-HIGH: BROWN/YELLOW (PIN 18)
CAN-LOW: YELLOW (PIN17)
Item No: CANbeam_06
Connection is made inside the cabin at the BCM box, which is located under the kick panel on the driver’s side.

Dodge RAM Laramie 2025–
LED –
CAN-HIGH: BROWN/YELLOW (PIN 18)
CAN-LOW: YELLOW (PIN17)
Item No: CANbeam_06
Connection is made inside the cabin at the BCM box, which is located under the kick panel on the driver’s side.

Dodge RAM Limited 2024-
LED –
CAN-HIGH: BROWN/YELLOW (PIN 18)
CAN-LOW: YELLOW (PIN17)
Item No: CANbeam_06
Connection is made inside the cabin at the BCM box, which is located under the kick panel on the driver’s side.

Missing your car model? – Please update us about this so we can ensure it gets added to the list.

Installation:
The installation of CANbeam is easily done in the engine compartment or in the wheel well on certain vehicles, which means that no installation needs to be done inside the cabin or through the firewall. To connect the system, the correct CAN cables are identified and CANbeam’s connection cables are soldered together with these.

Installation instructions:
Can High: White
Can Low: Yellow

As an alternative, a traditional switch can be used and connected to the brown cable. This should then go to 12v+

Maximum allowable load is 13A (156W at 12v). For higher loads, a separate reinforcement wiring must be installed, otherwise the CANbeam will be damaged.

5-year warranty.

Delivery info: For orders of more than the current stock balance or if the stock status is “special order”, this product has a normal delivery time of about 10-14 working days.