Canbus Interface High Beam with Inductive Reader Cable

Many modern vehicles lack a traditional 12V high beam plus signal, making it challenging to install auxiliary lights without specialist knowledge. The CanM8 CANBUS interface is a revolutionary solution that listens to the car's internal data communication (CAN bus) and generates a stable, analogue plus signal when the high beam is activated.

Thanks to the included inductive reader cable, you don't need to cut, strip or solder any cables in the vehicle's original system - preventing future troubleshooting and preserving the warranty.

When the interface detects that the high beam is on, a +12V signal is sent that can be used to any auxiliary light relay, such as our SEEB093-2A or SEEB093-3A wiring harness. This gives you full control over the auxiliary lights, even in cars where this would otherwise be technically impossible.

The unit also has status LEDs that show when the correct signal is being received, making installation easier to verify. It is also radio interference (EMC)-suppressed and built to withstand the vehicle environment.

Want to know where to connect the device to your car? We have a complete connection guide available - contact us for help.

Product type: CANBUS interface for high beam signal

Signal output: +12V positive signal when high beam is activated

Installation: Connection in the passenger compartment (e.g. at the steering column, OBD socket, stereo, etc.)

Cable colors:

Red: +12V constant

Black: Earth

White: CAN High

Blue: CAN Low

Purple: High beam signal (connect relay wiring here)

Status indicator: LED shows communication status

Compatibility: Large number of vehicles (see example above)

Assembly: Recommended by a professional

Note: Power must be disconnected when changing the connection point

Support: support@canm8.se (please specify car make, model year and picture of connection)

We always have fast delivery in only 1-3 days!

You always get a 3-year warranty on all our products – plus you have a 30-day money-back guarantee to shop safely and with peace of mind.

Telephone number: 030-277 04 00
Weekdays: 09:00-15:00
Closed for lunch: 12:00-13:00.

Email address: contact @ bilupplysningen .se

If you don't find the answer to your question below, please contact us at:

Phone : 030-277 04 00
E-mail : contact @ bilupplysningen .se

1. Is the product approved for use on Swedish roads?
   Yes, most of our products are E-marked and approved for use within the EU. Please check the product text for specific information about this particular model.
   
2. Does the product fit my car?
   Under each product we indicate which vehicles or sockets the product is suitable for. If you are unsure, please contact our customer service and we will quickly help you find the right one.
   
3. How quickly will I receive my order?
   We offer fast deliveries – your order is usually shipped the same day. Delivery time varies depending on the product, but you will normally have it within 1–3 working days.
   
4. Do you have open purchases?
   Of course! You always have a 30-day money-back guarantee with us. We also have a minimum 3-year warranty on all our products. You can feel confident testing the product at home in peace and quiet.
   
5. What happens if something doesn't fit or work?
   We are here for you! Should something go wrong, we will help you quickly with an exchange or return. Our support is easy to reach and we solve most problems immediately.
   
6. How do I know that the product is of high quality?
   We select our products with great care and test them thoroughly. We only work with manufacturers who meet high standards for durability and performance.
   
7. Is it difficult to assemble the product yourself?
   Most products are easy to assemble, and in many cases no special tools are needed. We send clear instructions where needed – otherwise we are here to guide you.